P0205 Land Rover Auto Trouble Code
P0205 Land Rover OBD2 reports a sensor fault, replacement of the sensor is unlikely to resolve the underlying problem. The fault is most likely to be caused by the systems that the sensor is monitoring, but might even be caused by the wiring to the sensor itself.
Accelerator Pedal Position Sensor 1 Circuit Low and P2127 - Accelerator Pedal Position Sensor 2 Circuit Low would lead you to suspect a defective accelerator pedal position sensor.
P0205 Land Rover Possible Solution:
In-line Ford engines, along with those of most other manufacturers, begin the numbering of cylinders at the front and proceed in numerical order toward the back. In the V-engine design, Ford follows a similar design with the number one cylinder at the front left of the engine. In the V-6 configuration, cylinder 4 is at the front right of the engine and in a V-8, cylinder number 5 is in that location. Other manufacturers sometimes use an alternating pattern in the V-engines.
P0205 Land Rover Description For All Models :
- Land Rover Defender
- Land Rover Discovery
- Land Rover Discovery 2
- Land Rover Discovery 3
- Land Rover Discovery 4
- Land Rover Discovery 5
- Land Rover Evoque
- Land Rover Freelander
- Land Rover Freelander 2
- Land Rover Lr2
- Land Rover Lr3
- Land Rover Range Rover
- Land Rover Serie I
- Land Rover Series I
- Land Rover Series Ii
- Land Rover Series Iii
- Land Rover Velar
|
P0205 Land Rover Trouble Repair :
The sensors receive a 5 volt reference signal from the PCM. As pressure readings change, the sensor varies the voltage and the computer reads that to determine input. In the case of a broken wire, the sensor never sees the voltage and the computer assumes a major fault. So if you get this P0205 Land Rover code, first check to make sure you're getting a good 5 volt reference signal at the sensor. |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.